Rki-instruments 35-3010RK-02 Manual de usuario descargar pdf (Pagina 5)

35-3010RK-02 Sample-Draw Detector • 1

Overview

This manual describes the 35-3010RK-02 sample draw detector. This manual also

describes how to install, start up, maintain, and calibrate the sample draw detector when

it is used with a gas monitoring controller. A parts list at the end of this manual lists

replacement parts and accessories for the detector.

Specifications

Table 1 lists specifications for the 35-3010RK-02.

WARNING: When using the 35-3010RK-02, you must follow the instructions and

warnings in this manual to assure proper and safe operation of the

35-3010RK-02 and to minimize the risk of personal injury. Be sure to

maintain and periodically calibrate the 35-3010RK-02 as described in this

manual.

Table 1: Specifications

Target Gases & Detection Ranges Combustible Gas: 0 - 100% LEL

Oxygen: 0-25% volume

Hydrogen Sulfide (H

S): 0 - 100 ppm

Input Power 24 VDC

Current Draw 200 mA

Construction (housing) Fiberglass/polyester (NEMA 4X)

Dimensions 15.44 in. H x 12.55 in. W x 8.31 in. D

Weight 14 lbs.

Sampling Method Sample draw

Sample Flow 1.2 SCFH (nominal)

Response Time 90% in 30 seconds

Accuracy Combustible Gas

± 5% of reading or ± 2% LEL (whichever is greater)

Oxygen

± 0.5% O

Hydrogen Sulfide:

± 5% of reading or ± 2 ppm H

S (whichever is greater)

1 2 3 4 5 6 7 8 9 10 ... 25 26

Sin comentarios

Rki-instruments 35-3010RK-02 Manual de usuario Pagina 5