Rki-instruments GD-K8A Manual de usuario Pagina 15
- Pagina / 19
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Model GD-K8A Diffusion Detector Head • 11
4. Loosen the two screws that secure the sensor bracket to the housing, then remove the
sensor unit from the housing.
5. Remove the two screws on the back of the sensor bracket that secure the sensor to the
bracket and remove the sensor with amplifier from the bracket.
6. Disconnect the ASK from the amplifier. A cable leading from the ASK plugs into a
connector near the top of the amplifier.
7. Remove the screw near the top of the amplifier that secures the amplifier to the sensor
and disconnect the amplifier from the sensor.
8. Connect the amplifier to the new sensor and secure it with the screw you removed in
step 7.
9. Reinstall the sensor to the sensor bracket.
10. Reconnect the cable from the ASK to the amplifier.
11. Reinstall the sensor bracket to the housing.
12. Turn on power to the controller and turn on the controller.
13. Allow the new sensor to warm-up for at least 2 hours.
14. Calibrate the GD-K8A as described in the Calibration section.
Replacing the Alkaline Batteries in the ASK
NOTE: Change the alkaline batteries with the controller on and the GD-K8A on
power and operating. If power to the GD-K8A is turned off to change the
alkaline batteries, the gas readings may be unstable for a short time when
power is restored.
1. Open the housing door.
2. Carefully remove the old alkaline batteries from the ASK in the upper part of the
housing. Do not touch the ASK circuit board.
3. Carefully install the new alkaline batteries observing the proper battery orientation.
4. Close the housing cover.
- Operator’s Manual 1
- Product Warranty 3
- Table of Contents 4
- Overview 5
- Specifications 5
- Description 6
- Sensor Unit 7
- Auto Sensor Keeper (ASK) 8
- Installation 9
- Start Up 11
- Maintenance 12
- Troubleshooting 13
- Storing the GD-K8A 14
- Calibration 16
- Parts List 18
- Part Number Description 19
- ES-K239C-O3 Sensor, ozone 19
- Table 2: Parts List 19
Relacionado con productos y manuales para Sensores Rki-instruments GD-K8A
Sensores Rki-instruments PS-2 Manual de usuario
(3 paginas)
(3 paginas)
Sensores Rki-instruments SD-705EC Manual de usuario
(38 paginas)
(38 paginas)
Sensores Rki-instruments SC-01 Manual de usuario
(68 paginas)
(68 paginas)
Sensores Rki-instruments GX-2003 Manual de usuario
(64 paginas)
(64 paginas)
Sensores Rki-instruments GX-2009 Manual de usuario
(54 paginas)
(54 paginas)
Alfresco Refrigerator ARFG-42 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Pomiary, testowanie i kontrola Alfresco Refrigerator ARFG-42.
Dostarczamy 1 pdf podręczników Alfresco Refrigerator ARFG-42 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Comentarios a estos manuales