Rki-instruments GX-2009 Manual de usuario Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 54
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
Write Commands • 27
sections in this manual.
Date/Time Set
Use Date/Time Set to update the date and time in a connected
instrument to match the computer’s date and time. Follow these
steps to update an instruments date and time:
1. Launch the GX-2009 User Setup Program as described in
“Launching the Program” on page 14.
2. Connect the GX-2009 to the User Setup Program as
described in “Connecting a GX-2009 to the User Setup
Program” on page 15.
NOTE: It is not necessary to use Instrument Information or
Instrument Get & Save in order to update the date and
time. Although it is not necessary to use Instrument
Information or Instrument Get & Save before
updating the instrument’s date and time, you can update
the date and time after using either of these commands
if desired.
3. Click Date/Time Set. The following window will appear.
4. Click Yes. The program will update the instrument’s date and
time to match the computer’s, then display the following
Figure 21: Update Window
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 53 54

Comentarios a estos manuales

Sin comentarios