Rki-instruments Beacon 200 RIg Monitor, H2S/H2S Manual de usuario Pagina 33
- Pagina / 51
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Beacon 200 Rig Monitor Operator’s Manual • 28
Enable/Disable Channel(s) Menu
1. From normal operation, simultaneously press and hold the ESCAPE
and ENTER buttons for approximately 5 seconds to enter the Channel
Control & Setup Program. Release the buttons when the Control &
Setup Program Proceed? [YES] or [NO] message appears on the
display screen.
2. Press the UP/YES button to continue.
3. Press the UP/YES or DOWN/NO button until the 1) Enable/Disable
Channel(s) message appears on the display screen, then press the
ENTER button.
4. Use the UP/YES and DOWN/NO buttons to select the channel you
want to enable or disable, then press the ENTER button.
5. Press the DOWN/NO button. The CHANNEL USAGE setting displays
on the display screen.
6. Use the UP/YES and DOWN/NO buttons to display the setting you
want, then press the ENTER button to select the setting. The table
below describes the three available settings.
7. Press the ESCAPE button, then press the DOWN/NO button to return
to normal operation.
Table 7: Beacon 200 Channel Usage Settings
Setting Description
CHANNEL ENABLED The Rig Monitor displays gas readings and initiates gas and channel failure alarms
when appropriate.
Use this setting for normal operation when the channel has a detector head wired to
it.
CHANNEL DISABLED The Rig Monitor displays DISABLED for the channel and the channel’s alarm circuit
is not active.
Use this setting when the channel has a detector head wired to it, but gas readings
and alarms are not required for the channel (for example if the detector head requires
maintenance or is malfunctioning).
CHANNEL NOT USED The Rig Monitor leaves the channel blank on the display screen.
Use this setting when the channel does not have a detector head wired to it.
- Hydrogen Sulfide 1
- Beacon 200 Rig Monitor 1
- Operator’s Manual 1
- Product Warranty 3
- Table of Contents 4
- Chapter 1: Introduction 6
- ~ Vac (AC voltage) 7
- Specifications 8
- Chapter 2: Description 9
- External Description 10
- 12 VDC Battery Cable 12
- Internal Description 13
- Program Buttons 14
- Main PCB 15
- Terminal Connects to: 16
- Power Converter 17
- Overview 18
- Mounting the Beacon 200 Rig 18
- BEACON 200 19
- 14.2 Max 20
- Wiring the Beacon 200 Rig 21
- Connecting External Alarms 22
- Connecting a Recorder 23
- Chapter 4: Operation 25
- Recorder Output Operation 26
- Alarm Indications 27
- Alarm 1 Condition 28
- Alarm 2 Condition 29
- Fail Condition 29
- Low Battery Condition 30
- Readings 31
- Setting Description 33
- Configure Channel Settings 34
- View System Information Menu 36
- Chapter 6: Maintenance 37
- Preparing for Calibration 38
- Adjusting the Span Setting 40
- Adjusting Strobe/Horn Volume 42
- Audio Select Switch 43
- Strobe Brightness Switch 43
- (DO NOT ADJUST) 43
- Replacing Components of the 44
- Rig Monitor 44
- Replacing the Plug-In H 45
- S Sensor 45
- Replacing the Gas Detector 45
- Preventive Maintenance 46
- Troubleshooting 48
- Slow or No 50
- Response/ 50
- Difficult or 50
- Unable to 50
- Calibrate 50
- Parts List 51
Relacionado con productos y manuales para Sensores Rki-instruments Beacon 200 RIg Monitor, H2S/H2S
Sensores Rki-instruments 49-8103RK Manual de usuario
(10 paginas)
(10 paginas)
Sensores Rki-instruments 49-8104RK Manual de usuario
(13 paginas)
(13 paginas)
Sensores Rki-instruments Pioneer 4W Manual de usuario
(128 paginas)
(128 paginas)
Sensores Rki-instruments 1017-01 Manual de usuario
(15 paginas)
(15 paginas)
Sensores Rki-instruments 1017-03 Manual de usuario
(15 paginas)
(15 paginas)
Sensores Rki-instruments 1017-04 Manual de usuario
(15 paginas)
(15 paginas)
Sensores Rki-instruments 1017-05 Manual de usuario
(15 paginas)
(15 paginas)
Zanussi ZOA3572XMU manuales
Manuales del propietario y guías del usuario para Sandwicheras Zanussi ZOA3572XMU.
Ofrecemos 1 manuales en pdf Zanussi ZOA3572XMU para descargar gratis por tipos de documentos: Manual de usuario
Comentarios a estos manuales