Rki-instruments Data Cal 2000 Manual de usuario Pagina 18
- Pagina / 88
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
13 • Data Cal 2000 Hardware Setup
Power Cord
A three-pronged AC power cord is provided with the Data Cal 2000. One
end connects to a standard AC wall outlet and the other end plugs into
the AC power socket on the back of the docking station.
4-Gas Mix Calibration Cylinder
The Data Cal 2000 may be ordered with or without calibration gas and a
demand flow regulator. The standard configuration of the Data Cal 2000
includes a demand flow regulator and one 58 liter 4-gas mix calibration
cylinder which typically contains 50% LEL CH
4
/12.0% oxygen/50 ppm
CO/25 ppm H
2
S. If another cylinder is required for your system, for
example if you need a % volume CH
4
cylinder for a 5-sensor GX-2003, it
will have to be ordered separately along with an additional demand flow
regulator.
Demand Flow Regulator & 3 ft. Tube
The standard configuration of the Data Cal 2000 includes one demand
flow regulator with 3 feet of flexible polyurethane tubing. The demand
flow regulator screws onto a calibration cylinder and the tube is used to
connect the regulator to the appropriate calibration gas fitting on the back
of the docking station. When the regulator senses a vacuum at its fitting,
it allows the gas from the cylinder to flow.
10 Foot Exhaust Tube
The Data Cal 2000 comes with a 10 foot 5/16” I.D. exhaust tube. This
exhaust tube is intended to be used as the collective exhaust for any
connected DM-2001s and DM-2003s. Any connected DM-2009s require
their own dedicated exhaust. Another 10 foot 5/16” I.D. tube is
recommended for each connected DM-2009. This extra tubing is not
included in the Data Cal 2000 kit or in the DM-2009 but can be
purchased from RKI Instruments, Inc.
Data Cal 2000 Hardware Setup
There are two parts to preparing the Data Cal 2000 Docking Station for
use: hardware setup and software setup.This section describes
hardware setup. The hardware setup consists of setting the docking
module configuration switches, simple mechanical assembly, cable
installation, and tubing installation.
- Data Cal 2000 1
- Operator’s Manual 1
- Warranty 2
- Table of Contents 3
- Introduction 6
- System Requirements 7
- Specifications 8
- Description 9
- Docking Station 10
- Description • 6 11
- Cal 2000 12
- 9 • Description 14
- DM-2001 DM-2001 15
- To GX-2003 Inlet Fitting 16
- Front ViewTop View 16
- To GX-2003 Exhaust Fitting 16
- Communication Cables 17
- Data Cal 2000 Hardware Setup 18
- Mechanical Assembly 20
- Cable Installation 21
- Tubing Installation 22
- GX-2001 and/or GX-2003 23
- AIR GAS 1 GAS 2 24
- Station Software 26
- Data Cal 2000 Functions 29
- Main Program Window 30
- Setting Up the Data Cal 2000 32
- Software 32
- Setting Up the Configuration 33
- Adding and Updating Cylinders 38
- Setting Up the Solenoids 41
- Connecting Instruments to the 43
- PC 44
- Bump Testing Instruments 47
- 43 • Bump Testing Instruments 48
- Bump Testing Instruments • 44 49
- Calibrating Instruments 50
- Calibrating Instruments • 46 51
- 47 • Calibrating Instruments 52
- Charging Instruments With The 53
- Logs Window 55
- 51 • Logs Window 56
- Deleting Data 57
- Alarm Trend Data 57
- 53 • Logs Window 58
- Logs Window • 54 59
- 55 • Logs Window 60
- Logs Window • 56 61
- 57 • Logs Window 62
- Calibration Data 63
- 59 • Logs Window 64
- Logs Window • 60 65
- Event Data 66
- Interval Trend Data 67
- 63 • Logs Window 68
- Logs Window • 64 69
- 65 • Logs Window 70
- Logs Window • 66 71
- 67 • Logs Window 72
- Memo Feature 73
- 69 • Logs Window 74
- Bump Test Files 75
- 71 • Logs Window 76
- Open Function 78
- Edit Function 79
- Edit Function, Memo Entry 80
- Download Function 81
- Clear Logs Function 81
- Reset Function 81
- Configuration Window 82
- Parameter Tab 83
- Database Tab 84
- Sensor Tab 85
- Password Tab 86
- Optimizing the Database 87
- Spare Parts List 87
- Table 3: Spare Parts List 88
Relacionado con productos y manuales para Sensores Rki-instruments Data Cal 2000
Sensores Rki-instruments GX-94 Manual de usuario
(3 paginas)
(3 paginas)
Sensores Rki-instruments SDM-E2 Manual de usuario
(89 paginas)
(89 paginas)
(2 paginas)
Sensores Rki-instruments Gas Tracer Manual de usuario
(234 paginas)
(234 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.037 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales