Rki-instruments EAGLE 2 Manual Manual de usuario descargar pdf (Pagina 124)

114 • Using Setup Mode EAGLE 2 Operator’s Manual

2. Press and release POWER ENTER RESET. The Catalytic Units screen

appears with the current setting flashing at the bottom of the screen.

3. Use AIR ▲ YES or RANGE ▼ SHIFT to scroll through the choices,

CHANGE OK, vol% ONLY, %LEL ONLY, and ppm ONLY.

4. When the desired setting is on the screen, press and release POWER

ENTER RESET to save the setting and return to the main menu.

Updating the Catalytic Sensor Relative Response Setting

This menu item allows you to turn the catalytic sensor relative response

feature on and off. The catalytic sensor relative response feature enables you

to change the catalytic sensor’s response to gas on the fly so that the catalytic

channel is roughly calibrated to an alternate gas. For example, if the catalytic

channel is setup for and calibrated to methane, you can select hexane from a

gas list accessible from the Catalytic Sensor Relative Response Screen in

Display Mode so that the catalytic channel responds to gas as if it were

calibrated to hexane. See “Catalytic Sensor Relative Response Screen” on

page 43 for instructions to use the relative response feature.

The factory setting for CATALYTIC SENSOR RELATIVE RESPONSE

is OFF.

1. From the main menu, place the cursor next to RELATIVE RESPONSE.

Press and release POWER ENTER RESET. The Catalytic Sensor

Relative Response screen appears with the current setting flashing.

2. Use AIR ▲ YES or RANGE ▼ SHIFT to display the desired setting, ON

or OFF.

3. Press and release POWER ENTER RESET to save the setting and return

to the main menu.

CATALYTIC UNITS

UP/DOWN THEN ENTER

CHANGE OK

CATALYTIC SENSOR

RELATIVE RESPONSE

UP/DOWN THEN ENTER

OFF

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 308 309

Sin comentarios

Rki-instruments EAGLE 2 Manual Manual de usuario Pagina 124